"Linux Gazette...making Linux just a little more fun!"

The Answer Guy

By James T. Dennis, linux-questions-only@ssc.com
Starshine Technical Services, http://www.starshine.org/

The original thread appeared in Issue 30, Solaris -> Linux. The entire thread below was also posted in the comp.unix.questions newsgroup.

Remote lpd from Solaris to Linux

From The Answer Guy on 08 Jul 1998

Kuksi,

Here's another suggestion forwarded from one of my readers:

To which "Joe Ellis" adds:

Wasn't sure how to reply to this (no email address that I saw) but whoever had this question:

You have to (under redhat 5.0 anyway) add an account for each username on the remote system whom you wish to be able to print. I.E. if user 'foo' on the Solaris machine wants to remote print to the Linux box, you have to add a user account 'foo' to the Linux box. This is in addition to the host/ip in the /etc/hosts.lpd file. I haven't figured out WHY but I know in a stock redhat 5 box thats how it works. I cannot validate this for other Linux systems other than redhat as thats the only dist. I have access to at the moment.

-joe

That makes sense. You could probably edit the appropriate PAM (pluggable authentication module) configuration to allow anonymous access --- but I don't know, just off hand, which file that would be or what the magic configuration would look like.

I suppose we could ask on the PAM mailing list...

I've been meaning to install LPRng (the "next generation" print spooling suite) but haven't taken the time to do it. For now I actually rcp and print my files manually. I've had lpd working on some of my systems, sometimes. But I hardly ever print anything, so there's little inconvenience and not nearly enought to track it down.

For the first few years I used Linux I printed everything by preparing a file and using:

'cat ... > /dev/lp0'

... on that.

Let's just say, I don't like printers very much.

printing Solaris->Linux

From kuksi on 13 Jul 1998

There is no need to add an account, but thanks to Joe for the answer

Now it is working !!!! Yeahuj!! *** The problem was idiocity... : I installed the remote printer under Solaris:

1. #lpsystem -t bsd linux_machine_name
/Identifies the print server system and its type(bsd for BSD)/

2. #lpadmin -p printer_name -s linux_machine_name -T unknown -I any
/Identifies the printer on the printer server./

3. #accept printer_name
#enable printer_name

^^^^^^^^^^^^^^^^^^^
/Specifies that the print client can send print request to the printer./

4. #lpadmin -d printer_name
/Set's the printer as the system's default printer destination./

5. #lpstat -t 
scheduler is running
system default destination: printer_name
system for printer_name: linux_machine_name
printer_name accepting request since Mon Jul 13 10:25:43 MET DST 1988

printer printer_name is ready. disabled since Mon Jul 13 10:25:55 MET

^^^^^^^^

DST 1988

new printer

/Verifies that the printer is ready./

printing Solaris->Linux

From kuksi on 14 Jul 1998

(gondolom en

kuksi

Well, if that's a problem you could always try LPRng. Otherwise you might want to set up Linux as a NIS client on this LAN (if you're using NIS) --- or configure it so that it's passwd files are kept in sync with the others (assuming you're maintaining synchronized passwd files, which you really want if you're running any NFS throughout that site).

Copyright © 1998, James T. Dennis
Published in Linux Gazette Issue 31 August 1998

	backup	uidgid	connect	95slow	badblock	trident	sound
	kernel	solprint	idescsi	distrib	modem	NDS	rpm
	guy	maildns	memleak	multihead	cdr